Part of the guide SMS API Documentation: Android SMS Gateway, OTP and Webhooks
On this page
- Key takeaways
- How do SMS APIs charge in 2026?
- What is a segment, and why does it change your price?
- What does a per-message SMS API cost? A worked example
- What does that add up to each month?
- Why does a flat SMS API cost less as you grow?
- What do you get on a flat SMS8 API plan?
- How much engineering does a switch take?
- Why choose SMS8
- Stop paying per segment
Key takeaways
- Most cloud SMS APIs charge per message segment, then add carrier fees, a monthly number fee and A2P 10DLC registration fees on top.
- On Twilio, for example, an outbound US SMS on a long code is listed at $0.0083 per segment, plus a carrier fee of $0.0035 to $0.005, as listed on their website in November 2026. Inbound replies are billed too.
- Using only those listed figures, 10,000 one-segment texts a month come to about $129 to $144 before registration fees, and 50,000 texts to about $601 to $676.
- SMS8 is flat: USD 29, 89 or 229 a month for 1, 5 or 20 connected phones or Macs, with unlimited SMS and MMS and no per-message fee. Yearly billing costs half.
- The SMS8 API sends from your own SIM, so there is no number to rent and no A2P 10DLC filing. Test it on the 3-day trial with 30 messages, no card needed.
SMS API pricing in 2026 comes in two models. Most cloud providers charge per message, and the real price is the base rate plus carrier fees, number rental and registration, so the bill grows with every text. A flat plan charges a fixed monthly price and includes unlimited messages, so the bill stays the same as you grow. SMS8 is the flat model: your app calls one REST endpoint, the text leaves from the SIM in an Android phone you own, and you pay only for the phones you connect. This guide breaks down every line of a per-message bill, works through real totals, and shows when the flat model saves you money. For the API itself, see the SMS8 API documentation.
How do SMS APIs charge in 2026?
A per-message SMS API bill usually has four to six lines. The headline price is only the first one.
- A price per segment. You pay for each part of each message, not each message. Long texts and texts with emojis count as several.
- Carrier fees. US carriers charge a pass-through fee on business messages, and the API adds it as a separate line. It depends on which network each recipient is on.
- Inbound messages. On many APIs, every reply your customers send is billed as well.
- Number rental. A monthly fee for each long code, toll-free number or short code you send from.
- Registration. Business texting from US long codes through a cloud platform requires A2P 10DLC brand and campaign registration, with one-time and monthly fees.
- Extras. Failed message fees, MMS at a higher rate, and taxes.
Each line is small on its own. Together they make a bill that is hard to predict and that rises in a straight line with your volume.
What is a segment, and why does it change your price?
An SMS segment holds 160 characters when the message uses only the basic GSM-7 character set. A longer message is split into parts of 153 characters each. Add one emoji or a character outside GSM-7, such as a curly quote pasted from a word processor, and the whole message switches to UCS-2, where a segment holds 70 characters, or 67 per part when split.
So a friendly 180-character reminder is billed as two texts, and the same reminder with one emoji can be billed as three. If your average message is two segments, every per-segment number in this guide doubles. Paste your usual message into the free SMS character counter to see its real segment count before you budget.
On SMS8, segments do not change your price. A long message is still split on the phone network the normal way, but SMS8 charges nothing per message or per segment.
What does a per-message SMS API cost? A worked example
To keep the numbers real, here is one well-known provider. These figures come from Twilio's US SMS pricing page and A2P 10DLC documentation, as listed on their website in November 2026. Prices can change, so check before you budget.
| Line | Listed price |
|---|---|
| Outbound SMS, long code | $0.0083 per segment |
| Inbound SMS, long code | $0.0083 per segment |
| Carrier fee, outbound SMS | $0.0035 (AT&T) to $0.005 (Verizon) per message, $0.0045 on T-Mobile |
| Long code number | $1.15 a month |
| Toll-free number | $2.15 a month |
| Short code | $1,000 a month, billed quarterly, plus setup |
| A2P 10DLC brand registration and Standard vetting | $4.50 plus $41.50, one time |
| A2P 10DLC campaign vetting | $15 per campaign, one time |
| A2P 10DLC campaign fee | $1.50 to $10 per campaign per month |
| Failed message processing | $0.001 per failed message |
| Outbound MMS, long code | $0.022 plus a carrier fee of $0.009 to $0.01 |
Put together, one outbound one-segment US SMS on a long code costs between $0.0118 and $0.0133 before any monthly or registration fees. A text that looks like it costs under one cent ends up closer to one and a half. Our full breakdown of Twilio SMS pricing in 2026 goes through every fee line by line.
What does that add up to each month?
Using only the listed figures above, with these assumptions: outbound only, every text one segment, one long code at $1.15 a month, one A2P campaign at $10 a month, and a carrier fee between $0.0035 and $0.005. Inbound replies, failed message fees, taxes and the one-time registration fees are left out, so the real bill is higher.
| Texts per month | Base ($0.0083) | Carrier fees | Number and campaign | Per-message total | SMS8 |
|---|---|---|---|---|---|
| 1,000 | $8.30 | $3.50 to $5.00 | $11.15 | $22.95 to $24.45 | USD 29 flat (USD 14.50 yearly) |
| 10,000 | $83.00 | $35.00 to $50.00 | $11.15 | $129.15 to $144.15 | USD 29 flat (USD 14.50 yearly) |
| 50,000 | $415.00 | $175.00 to $250.00 | $11.15 | $601.15 to $676.15 | USD 89 flat for 5 phones (USD 44.50 yearly) |
Add about $61 in the first month for a Standard brand with one campaign on the per-message side. If customers reply, add the inbound rate and fee for every reply. If your texts average two segments, the base column doubles: 10,000 two-segment texts are $166 in base fees alone.
On the SMS8 side, the price stays where it is. Every extra text widens the gap, and replies, long messages and MMS add nothing. On yearly billing, SMS8 One Device is USD 14.50 a month, which is below the per-message total even at 1,000 texts. To run your own numbers with your segment count and volume, use the free SMS cost calculator.
A note on the 50,000 row: SMS8 does not cap messages, but a SIM should send at a natural pace. Bulk sends go out at about one message every 10 to 30 seconds per SIM, so for high volume you spread the load across several phones or dual-SIM phones, which is why that row uses the Five Devices plan.
Why does a flat SMS API cost less as you grow?
A per-message API resells carrier routes, so it has a cost for every text and passes it on. SMS8 does not resell routes. Your messages leave the SIM in your own phone, through your own mobile plan, the same way a text you type by hand does. Since SMS8 is not buying a route for each message, there is nothing to charge per text.
That changes three things for a growing product:
- Your cost stops tracking your usage. More users, more reminders and more replies do not change the SMS8 invoice.
- You stop rationing texts. The second reminder, the thank-you and the "your order shipped" text are free to send, so you send the ones that help customers. Our guide on why teams stop paying per SMS covers what that does for engagement.
- You can price texting into your own product. If you run a SaaS, you can include SMS in every plan without credits or overage fees. See our guide to the SMS API for SaaS.
Your mobile plan still applies on the SIM side. Many plans include unlimited texting under a fair use policy, so check what yours allows for business sending before a large send.
What do you get on a flat SMS8 API plan?
Every plan has the same features. You choose how many phones or Macs you connect:
| Plan | Monthly | Billed yearly (per month) | Connected phones or Macs | Team seats |
|---|---|---|---|---|
| One Device | USD 29 | USD 14.50 | 1 | 1 |
| Five Devices | USD 89 | USD 44.50 | 5 | 10 |
| Twenty Devices | USD 229 | USD 114.50 | 20 | 40 |
Included on every plan:
- Unlimited SMS and MMS. No fee per message, per segment or per reply from SMS8. MMS costs the same as SMS: nothing extra.
- The full REST API. Send one message or a batch, schedule, prioritise, read messages, resend failures, list devices, manage contacts and run OTP codes, all with one key in the
X-Api-Keyheader. - Signed webhooks. Received, sent, delivered and failed events, signed with HMAC-SHA256 and retried for up to 30 days.
- iMessage from a Mac you own. Add a Mac with SMS8 Gateway and Apple contacts get iMessage from the same send request, with SMS fallback.
- Integrations and AI. The npm SDK and CLI (
npm install sms8-sdk), the MCP server athttps://mcp.sms8.io, and official apps for GoHighLevel, Zapier, Make, WordPress, WooCommerce and Google Sheets.
There is no number rental from SMS8, no A2P registration fee and no carrier pass-through charge. Because texts go person to person from your own SIM, you do not file an A2P 10DLC brand or campaign.
How much engineering does a switch take?
Very little. The SMS8 API is a form post. The first send from Python:
import os
import requests
API = "https://app.sms8.io/api/v1"
HEADERS = {"X-Api-Key": os.environ["SMS8_API_KEY"]}
r = requests.post(f"{API}/messages", headers=HEADERS, data={
"number": "+14155550100",
"message": "Your order #4412 has shipped.",
"idempotencyKey": "order-4412-shipped",
}, timeout=30)
body = r.json()
print(body["data"]["messages"][0]["ID"] if body.get("success") else body["error"]["message"])
Swap your provider's send call for this request, point your reply handler at an SMS8 webhook, and keep your old account running until you are happy. The language guides for Python and Node.js cover bulk sends, replies and retries, and the SMS API guide for developers has PHP and curl side by side.

Why choose SMS8
- A flat price with unlimited messages. USD 29 a month for one phone or Mac, USD 89 for five and USD 229 for twenty, with unlimited SMS and MMS. Yearly billing is half.
- No hidden lines. No per-segment fee, no carrier fee, no number rental and no registration fee from SMS8. One line on the invoice.
- Your own number. Texts leave from a SIM your customers know, and replies come straight back to your webhook and shared inbox.
- No A2P 10DLC wait. Person-to-person texts from your SIM need no brand or campaign filing, so you can send today.
- A complete developer stack. REST API, OpenAPI file, signed webhooks, an npm SDK and CLI, and an MCP server for AI agents.
- Set up in minutes, try before you pay. Pair a phone, copy your key and send. The 3-day trial has 30 messages and needs no card.
Stop paying per segment
Per-message SMS API pricing looks cheap on the pricing page and expensive on the invoice. A flat plan turns texting into a fixed cost that does not move when your product grows. Start the SMS8 trial, send your first API call from your own phone, and compare the plans on the SMS8 pricing page.